2 thoughts on “How to use the paper tube in roll paper”
Sue
Rolling paper cylinder making gift box preparation materials: one, width and width tape roll, packaging paper, corrugated paper, photo glue (universal glue or double -sided glue). Let's do a lid first 1. Use a smaller width paper roll as a lid, seal the thick cardboard at the bottom (the method of looking at the pen holder in detail), paste the circular paper larger than 1 cm of the round bottom, and cut the edges into strips shape. 2. Floating the note on the edge on the outside of the paper roll. 3. Tailing a long paper shape, as long as the circumference, the width is about 3 times the thickness of the paper roll. After the upper edge is folded inward for 1 cm, it is used to pack the paper roll 4 4 The same method cuts the edge to grow, and apply the photos (universal glue or double -sided glue) to the inside and the edges of the part. 5. Pull the edge note to the bottom of the bottom. 6. The circular paper is pasted to the bottom, and the lid is completely packaged. In the box body 1. Use wide paper rolls to make the box body. First, one side of the back cover, cutting a long paper, rounding of paper rolls, etc. Outside.
2. Leave 2 cm more paper on both sides and cut it into long strips, as shown in the figure below. 3. The long strip floating at the end of one end is attached to the bottom. 4. The other end is pulled to the inner floating sticker. 5. Paste the paper on the bottom and cover the white part. 6. The long corrugated paper rolls into a cylinder and placed in the box. The height must be about 1.5 cm more than the box. 7, complete
You can apply a light bulb in the middle to make a small chandelier, or you can dug out a heart shape next to it. This light is more cute, or you all stick them directly on a cardboard. There are some small and fragmented things inside. Girls can be made into a hair card or something can be made
Rolling paper cylinder making gift box preparation materials: one, width and width tape roll, packaging paper, corrugated paper, photo glue (universal glue or double -sided glue). Let's do a lid first 1. Use a smaller width paper roll as a lid, seal the thick cardboard at the bottom (the method of looking at the pen holder in detail), paste the circular paper larger than 1 cm of the round bottom, and cut the edges into strips shape.
2. Floating the note on the edge on the outside of the paper roll.
3. Tailing a long paper shape, as long as the circumference, the width is about 3 times the thickness of the paper roll. After the upper edge is folded inward for 1 cm, it is used to pack the paper roll
4 4 The same method cuts the edge to grow, and apply the photos (universal glue or double -sided glue) to the inside and the edges of the part.
5. Pull the edge note to the bottom of the bottom.
6. The circular paper is pasted to the bottom, and the lid is completely packaged.
In the box body 1. Use wide paper rolls to make the box body. First, one side of the back cover, cutting a long paper, rounding of paper rolls, etc. Outside.
2. Leave 2 cm more paper on both sides and cut it into long strips, as shown in the figure below. 3. The long strip floating at the end of one end is attached to the bottom.
4. The other end is pulled to the inner floating sticker.
5. Paste the paper on the bottom and cover the white part.
6. The long corrugated paper rolls into a cylinder and placed in the box. The height must be about 1.5 cm more than the box.
7, complete
You can apply a light bulb in the middle to make a small chandelier, or you can dug out a heart shape next to it. This light is more cute, or you all stick them directly on a cardboard. There are some small and fragmented things inside. Girls can be made into a hair card or something can be made